Straightener Fit Guide

Fit and features

Hair straightener plate width: narrow, standard or wide?

Width describes the plate span, not the result

Plate width is the side-to-side working span of a straightener plate. The documented 0.60-inch Mini, 1-inch irons and 2-inch Chronos Max plates create clearly different sectioning choices, but the number alone does not predict shine, smoothness, damage or styling time.

Narrow plates and detailed access

A narrow tool can be easier to place on smaller sections and near the root, fringe or shorter layers. The tradeoff is that less plate width contacts a given section. If you have longer hair, narrow plates may involve dividing the hair more deliberately. That is a practical expectation from plate geometry, not a tested performance finding.

Wider plates and larger sections

A broad plate can cover a wider section at a time. That may appeal to someone with long, thick or dense hair, but the section still has to pass safely and comfortably between the plates. A wide tool may feel awkward at the nape, around a fringe or close to the scalp. Do not choose the widest option only because a listing claims speed.

A useful fit check

  • Think about the size of the sections you can control, not just total hair length.
  • Check an exact model’s actual plate width; brand families may include several widths.
  • Keep unknown width values unknown. A similar name does not supply a missing measurement.
  • For a comparison, ask whether the width differs enough to affect your intended sectioning—not which model has the larger number.

The individually reviewed width records include the black ghd Mini SKU 662 at 0.60 inch; fourteen one-inch ghd iron configurations, including the brush bundle SKU 691 and Cherry Chic dryer set SKU 720; BaBylissPRO BNT130T and TrueTension BNTE100T at 1 inch, Prima3100 at 1 inch, BNT4091TUC at 1¼ inches, BNT131T and Ultra-Thin BNT4073TUC at 1.5 inches, and BNT134T at 2 inches; black Sculpt SKU 794 and standalone black and white Sculpt tools at 26 mm (about 1.0236 inches); black ghd Max at its specific 1.65-inch FAQ dimension; and five two-inch Chronos Max configurations. The two ghd bundle widths are bridged from the standard Chronos one-inch family; their set pages do not publish separate inner-iron SKU codes. The black and white Duet Style hybrid pages give sectioning advice but no numeric plate-width measurement, so they cannot satisfy a numeric cap. BNT4073TUC is the separate Ultra-Thin 1½-inch listing, not the similarly sized Ultra-Sleek BNT131T; width equality does not make their operating evidence interchangeable. Bundle contents do not change an included iron’s published plate span. These maker-listed dimensions illustrate different sectioning choices; they do not establish comfort, reach or styling results.

Exact-model reviews for this boundary: SinglePass Smooth X 201197-UL-10 · Curling Straightener 301389-UL-10 · Lucea 77530 · SinglePass X 73541 · Smooth ID 77534 · Lucea 76520/76524 · SinglePass Compact 77500 · SinglePass StylePlus 77590. Each review preserves exact measurements, unknowns and conflicts.

Cycle 68 numeric-width and heat boundaries: Smooth X 201197-UL-10, Smooth ID 77534, Lucea White 76520/Graphite 76524 and StylePlus 77590 are listed at one inch: they meet a 1.00-inch inclusive ceiling and fail at 0.95. Lucea 77530 and SinglePass X 73541 are 1.5 inches: they meet 1.50 and fail at 1.45. The Curling Straightener has no numeric width, while Compact 77500 has conflicting 0.8- and 1-inch labels, so neither is counted at any width cap. For heat intersection, the four documented one-inch adjustable models are distinct from fixed-heat Compact; both 1.5-inch irons are adjustable. These are source-backed values, not proof of section size or styling speed. Read all eight model assessments via the one-inch and 1.5-inch width scenarios · One-inch plus adjustable heat → · 1.5-inch plus adjustable heat → · One-inch plus fixed heat →

Cycle 68 width-and-reach interactions: one-inch Smooth ID and Lucea 76520/76524 meet an eight-foot minimum; the one-inch Smooth X and StylePlus have unknown cable length and fail any positive minimum. At 1.5 inches, Lucea 77530 has eight feet while SinglePass X 73541 has nine; the latter reaches the inclusive 9-foot condition, but neither result fixes the Lucea voltage conflict. Compact 77500's nine-foot cable cannot fill its unknown-width field. 1 inch and 8 feet → · 1 inch and 8.5 feet → · 1.5 inches and 8 feet → · 1.5 inches and 9 feet →

Cycle 67 inclusive width boundary: T3 lists a one-inch plate on its SinglePass StyleMax; that nominal width qualifies at a 1.00-inch maximum, not at 0.95 inch. The iron also documents manual heat selection, so it fits the one-inch/adjustable-heat intersection, but its cord length is not published and cannot satisfy a positive numeric cable minimum. Read the StyleMax assessment · 0.95-inch maximum · inclusive one-inch maximum · one-inch plus adjustable heat · one-inch plus a one-foot cable minimum →

Cycle 62 Conair width boundaries: CS1000 is 1.00 inch, CS1001 is 1.25 inches and CS1002 is 1.50 inches, so each joins at its inclusive maximum and not below it. With adjustable heat also required, a 1.00-inch cap admits CS1000; 1.25 inches adds CS1001; 1.50 inches adds CS1002. All three are corded and selectable-heat models, but a simultaneous positive cable-length minimum excludes them because exact numeric lead lengths are unknown. Compare the original CS1000, CS1001 and CS1002 reviews and preserve the same other conditions in each finder query: 1.00-inch cap · 1.25-inch cap · 1.50-inch cap · 1.00 inches plus adjustable heat · 1.25 inches plus adjustable heat · 1.50 inches plus adjustable heat · 1.00 inch plus six feet · 1.50 inches plus six feet →

Cycle 59 plate-width boundary note: BNTC9200HP's straightening action comes from a curved-tooth comb with dryer airflow, not a pair of plates. The exact sources give no numeric plate span, so this product is unknown—not a zero-width or narrow-plate match—and is excluded when a maximum plate width is an essential filter. Compare the airflow-comb assessment · Keep the same one-inch maximum-plate-width condition →

Cycle 55 inclusive plate-width thresholds: CA1087F enters at 0.75 inch; the new one-inch tier is CA2013 plus separate Titanium XL GF1051 White and GF8562 Black; CA7558 enters at 1.25 inches; the Air Setter CA1133 enters at 2.00 inches. These exact maker-listed widths are thresholds, not speed claims. Read CA1087F, CA2013, GF1051, GF8562, CA7558 and CA1133. 0.70-inch cap · inclusive 0.75-inch cap · 0.95-inch cap · inclusive one-inch cap · 1.20-inch cap · inclusive 1.25-inch cap · 1.95-inch cap · inclusive two-inch cap →

Cycle 55 width/reach interaction: at a 1-inch maximum and 6.5-foot minimum, the mini CA1087F, CA2013 and both 11-foot Titanium XL configurations meet the same-plan conditions; at 7 feet, the two 6.5-foot one-inch tools and the 0.75-inch mini drop out, leaving the GF1051/GF8562 pair among these six. The 1.25-inch CA7558 and 2-inch CA1133 exceed the one-inch cap regardless of cord reach. 1-inch cap / 6.5-foot minimum · same cap / 7-foot minimum →

Cycle 54 inclusive plate-width boundaries: the CA2222 lists 0.75-inch inner plates: a 0.70-inch maximum leaves it out, while an inclusive 0.75-inch maximum admits it. The CA1174 and GF0101 each list 1.50-inch plates, so a 1.45-inch cap excludes them and a 1.50-inch cap admits them. The single-question matcher has 5 results at 0.70, 11 at 0.75, 86 at 1.45 and 105 at 1.50 inches; these are catalog-rule outputs, not performance rankings. 0.70-inch cap · inclusive 0.75-inch cap · 1.45-inch cap · inclusive 1.50-inch cap →

Cycle 54 width/reach interaction: CA2222's own 0.75-inch plates and listed 6.5-foot cable meet a 0.75-inch cap with 6.0- or 6.5-foot minimums; increasing the cable floor to 7.0 feet excludes it. The broader one-inch/6.5-foot case still admits this narrower iron, but the new 1.5-inch CA1174 and GF0101 do not fit a one-inch ceiling. Review the exact CA2222, CA1174 and GF0101 records · 0.75-inch cap / 6-foot minimum · 0.75-inch cap / 6.5-foot minimum · same cap / 7-foot minimum →

Cycle 53 exact-variant width boundary: GF1595A, CA1010 and CA2205 each list one-inch plates, so an inclusive 1.00-inch cap admits them and a 0.95-inch maximum does not. The separate GF7057A lists 1.25-inch plates; it enters at 1.25 inches, not at a one-inch ceiling. CA2205’s separate 4.25-inch plate-length claim does not make its plate wider. 0.95-inch cap · 1.00-inch cap · 1.25-inch cap →

Cycle 53 width/reach interaction: under a 1.65-inch cap, all four CHI models meet 8.5-, 9- and 11-foot minimums on their listed lengths; only the two 11-foot G2 variants meet an 11-foot minimum. Under a one-inch cap and 6.5-foot minimum, GF1595A, CA1010 and CA2205 fit, while GF7057A exceeds width. The 6.5-foot pair does not meet seven feet; no 11-foot lead meets 11.5 feet. See the separate GF1595A, GF7057A, CA1010 and CA2205 assessments · 1.65-inch cap / 11-foot minimum · one-inch cap / 6.5-foot minimum →

Cycle 52 one-inch width boundary: CHI lists GFDB12 plates at 1.00 inch, so the inclusive 1.00-inch maximum admits it while a 0.95-inch cap does not. The same page identifies titanium plates; the width is a nominal manufacturer specification, not a section-size, speed or root-access guarantee. Read the GFDB12 assessment · 0.95-inch maximum · inclusive one-inch maximum →

Cycle 52 width/reach cross-check: GFDB12's one-inch plates and 11-foot cord fit a 1.65-inch cap with 8.5- or 9-foot minimums, a one-inch cap with 6- or 6.5-foot minimums, and a 1.5-inch cap with an 11-foot minimum. The 11.5-foot case excludes it. Compare the GFDB12 review · 1.65-inch cap / 8.5-foot minimum · 1.65-inch cap / nine-foot minimum · one-inch cap / six-foot minimum · one-inch cap / 6.5-foot minimum · 1.5-inch cap / 11-foot minimum →

Cycle 51 exact one-inch boundary: the official CHI pages list a one-inch plate for the standalone curved-edge GF8813, the iron inside the distinct GF1185 Special Edition kit, and the fixed-preset GF1001. All three stay outside a 0.95-inch maximum and enter at the inclusive 1.00-inch threshold. GF1185 adds a listed protector and Sherpa bag; it is a separate package, not another iron configuration. Keep the 0.95-inch ceiling · Raise it to the inclusive one-inch threshold →

Cycle 51 width-and-cable intersection: GF1001’s one-inch plates and 11-foot cord meet an inclusive one-inch/11-foot plan; it also fits the 1.5-inch/11-foot combination. The GF8813 and GF1185 irons fit these width caps, but no exact numeric cord length is published, so neither meets a positive cable minimum on current evidence. The 11-foot boundary is a listed length, not a safe-use radius. Read the GF1001, GF8813 and GF1185 assessments · 1-inch cap / 6-foot minimum · 1-inch cap / 6.5-foot minimum · 1.5-inch cap / 11-foot minimum · 1.5-inch cap / 11.5-foot minimum →

Cycle 50 width/reach interaction at a 1.65-inch cap: all three new CHI models list an 11-foot cord, so each meets both the 8.5-foot and 9-foot minimums on the same plan. Their listed widths are 1.25 inches for GF1042 and 1.50 inches for GF8300/GF1187. See GF1042, GF8300 and GF1187 · 1.65-inch cap / 8.5-foot minimum · 1.65-inch cap / 9-foot minimum →

Cycle 50 width thresholds: the 1.25-inch GF1042 first fits at a 1.25-inch maximum; 1.5-inch GF8300 and GF1187 are still too wide at 1.45 inches, then enter at the inclusive 1.50-inch cap. This distinguishes plate width from GF1187's separately stated five-inch plate length and GF1042's four-surface shape. The listed widths are not physical measurements or styling-time evidence. Read GF1042, GF8300 and GF1187 · 1.25-inch cap · 1.45-inch cap · inclusive 1.50-inch cap →

Cycle 49 width boundary: all three distinct new CHI LAVA configurations (GF8269, GF8281 and GF8215) have manufacturer-listed one-inch plates. They enter at an inclusive 1.00-inch maximum and fail a 0.95-inch cap; no plate width is inferred from a photo. The exact pages identify GF8269 as the analog preset tool, GF8281 as an adjustable travel iron and GF8215 as a separately adjustable model. Compare the GF8269, GF8281 and GF8215 reviews · 0.95-inch cap · inclusive one-inch cap →

Cycle 49 width/reach addition: at a 1.65-inch cap with an 8.5-foot minimum, GF8269 and GF8215 qualify on their listed 11-foot cords; GF8281’s 6.5-foot lead is too short.

Cycle 49 width/reach addition: at a 1.65-inch cap with a 9-foot minimum, GF8269 and GF8215 qualify on their listed 11-foot cords; GF8281’s 6.5-foot lead is too short.

Cycle 49 width/reach addition: with a one-inch cap and a 6-foot minimum, all three new CHI models qualify; GF8281’s listed 6.5 feet clears this floor, while GF8269 and GF8215 each list 11 feet.

Cycle 49 width/reach addition: with a one-inch cap and a 6.5-foot minimum, all three new CHI models qualify; GF8281 meets this threshold exactly, and GF8269 and GF8215 each list 11 feet.

Cycle 49 width/reach addition: with a one-inch cap and a 6-foot minimum, all three new CHI models qualify; GF8281’s listed 6.5 feet clears this floor, while GF8269 and GF8215 each list 11 feet.

These conditions use the cord length of the same one-inch straightener plan, not a package-wide or safety-radius estimate. Read the individual GF8269, GF8281 and GF8215 assessments. Exact finder cases: 1.65 inches / 8.5 feet · 1.65 inches / 9 feet · one inch / 6 feet · one inch / 6.5 feet →

Cycle 48 inclusive-width boundary: all three exact CHI LAVA Ministyler SKUs are listed at 1.50 inches; they fit a 1.50-inch maximum and fail at 1.45 inches. “Ministyler” is the range name, not evidence of a narrow plate. The White GF0097, Red CA8578 and Gunmetal CA8595A pages give the same 1.5-inch plate width. The Gunmetal page additionally lists a 2 oz 44 Iron Guard spray; the reviewed pages establish no functional difference between White and Red. At 1.45 inches, exclude these plates · At the inclusive 1.50-inch maximum, include them →

Cycle 47 inclusive-width boundary: the exact GF8822 page lists a 1.00-inch plate, so it enters at a one-inch maximum and remains above a 0.95-inch ceiling. This is a manufacturer dimension, not a measurement from the photo or a styling-speed claim. Read the GF8822 4D review · 0.95-inch maximum · inclusive one-inch maximum →

Cycle 47 width/reach interaction: GF8822's 1.00-inch plate and 11-foot cord satisfy a one-inch cap with an 11-foot minimum; its cord does not meet 11.5 feet. It also clears a 1.65-inch cap with 8.5- or 9-foot minimums, a one-inch cap with six feet, and a 1.5-inch cap with 11 feet. At a 1.5-inch cap, the same lead still misses an 11.5-foot minimum. The exact one-inch page leaves universal voltage unconfirmed and lists conflicting maximum-temperature details. Compare the GF8822 review · one-inch / 11-foot case · one-inch / 11.5-foot case →

Cycle 46 exact width boundaries: GF0099 enters at an inclusive 1.00-inch maximum, while GF0096 enters at 1.50 inches; neither width is inferred from its photo. At 1.0 inch GF0099 fits and GF0096 does not; both fit at 1.5 inches. The 1.5-inch model’s separately listed five-inch extended plate length is not a width value or a speed test. Read GF0099 and GF0096 · one-inch maximum · 1.45-inch maximum · inclusive 1.5-inch maximum →

Cycle 46 width/reach interaction: both CHI irons list 11-foot cables, but their 1.00- and 1.50-inch widths cross different maximums; a 1-inch cap admits only GF0099, while a 1.65-inch cap admits both. At a 1.5-inch ceiling and an 11-foot minimum, both exact plans fit; at the same ceiling and an 11.5-foot minimum, neither does. Cable length is not a safe-use radius. Compare GF0099 and GF0096 · 1-inch / six-foot case · 1-inch / 6.5-foot case · 1.65-inch / 8.5-foot case · 1.65-inch / nine-foot case · 1.5-inch / eleven-foot case · 1.5-inch / 11.5-foot boundary →

At a 1.5-inch width ceiling and an 11.5-foot cable minimum, no reviewed plan qualifies: GF0099 and GF0096 each list 11 feet, GF9021 lists 11 feet, and GF9024A has no documented numeric cord length. Unknown reach is not evidence that a cord exceeds the threshold. GF0099 · GF0096 · Keep the same width and 11.5-foot minimum together →

Cycle 45 width boundary: GF9021 is documented at 1.00 inch and GF9024A at 1.50 inches; each enters only at its inclusive plate-width ceiling, while AirGlide still has no documented plate width. At a 0.95-inch cap, both Ruby Anniversary plates exceed the ceiling; at 1.00 inches GF9021 fits but GF9024A does not, and the latter first fits at 1.50 inches. Read the separate GF9021 and GF9024A reviews · 0.95-inch cap · inclusive 1-inch cap · inclusive 1.5-inch cap →

At a 0.95-inch maximum, both Ruby Anniversary plate widths exceed the ceiling: GF9021 is 1.00 inch and GF9024A is 1.50 inches. Ruby Anniversary widths enter at inclusive caps: GF9021 at 1.00 inch and GF9024A at 1.50 inches; a narrower maximum does not fit the model above it. Compare both GF9021 and GF9024A records · keep the 0.95-inch ceiling · keep the inclusive 1.0-inch cap · keep the inclusive 1.5-inch cap →

Cycle 38 plate-width boundary: CB7403, CB5750NA and CB9350US have heated brush heads, while AS9550NA has a 60 mm / 2.4-inch oval brush; none has a documented plate width and all fail any entered maximum from 0.5 to 2.5 inches. Brush-head dimensions are not plate measurements. Leave the width field blank to compare brush-style straightening tools, or enter a cap only when a documented plate width is essential. See the separate CB7403, CB5750NA, CB9350US and AS9550NA assessments · Test the inclusive one-inch maximum →

How the numeric width maximum is interpreted

Cycle 36 width boundary: neither S5523NA-VN nor S5525P-VN fits a 1.70-inch maximum; both first enter at the inclusive 1.75-inch cap on the assessed width. The S5523NA-VN body, URL and image say 1.75 inches, but its title and collection card say 3/4 inch, so verify the delivered plate. S5525P-VN is consistently listed at 1.75 inches. Compare S5523NA-VN and S5525P-VN · 1.70-inch cap · inclusive 1.75-inch cap.

Cycle 36 at a 1.65-inch maximum and 8.5-foot minimum: S5523NA-VN and S5525P-VN are each assessed at 1.75 inches, exceeding the width cap, and neither has a documented numeric lead to meet the length minimum. The width and cable conditions apply to the same iron; a missing cord measurement does not qualify as 8.5 feet. Compare S5523NA-VN and S5525P-VN · Keep the exact 1.65-inch / 8.5-foot requirements together →

Cycle 35: S1303, S5503NA and S5505P-VN are each assessed as one-inch irons, so all three are excluded at 0.95 inches and enter at the inclusive 1.0-inch boundary; they remain within the higher caps from 1.05 through 2.0 inches. The S5505P-VN page title and gallery identify one inch, but a body sentence says 1¾ inches, so confirm that exact physical edition and its label. The independent S1303, S5503NA and S5505P-VN assessments retain this distinction. Keep each maximum unchanged in the finder: 0.95 · 1.0 · 1.05 · 1.25 · 1.45 · 1.50 · 1.65 · 1.70 · 1.75 · 1.95 · 2.0 inches.

Cycle 35 width/reach interaction: S1303, S5505P-VN and S5503NA fit the 1.65-inch cap at 8.5- and 9-foot minimums, and the one-inch cap at six- and 6.5-foot minimums, but none has a documented numeric lead length. The unknown value fails each positive cable requirement even when the width fits. Read the S1303, S5505P-VN and S5503NA records and keep each pair of numeric conditions intact: 1.65 / 8.5 feet · 1.65 / 9 feet · 1.0 / 6 feet · 1.0 / 6.5 feet.

Cycle 45 width/reach interaction: GF9021's 1.00-inch plate and 11-foot lead satisfy a maximum of at least 1 inch and a minimum through 11 feet; GF9024A has a known 1.50-inch width but unknown cord length. Under 1.65-inch/8.5-foot, 1.65-inch/9-foot, 1-inch/6-foot and 1-inch/6.5-foot selections, the GF9021 requirements coexist on the same corded plan. GF9024A fits only the width portion, not an evidenced reach minimum. See both exact assessments: GF9021 and GF9024A · 1.65 inches / 8.5 feet · 1.65 inches / 9 feet · 1 inch / 6 feet · 1 inch / 6.5 feet →

Cycle 45 width/reach interaction: GF9021’s 1.00-inch plate and 11-foot lead satisfy a maximum of at least 1 inch and a minimum through 11 feet; GF9024A has a known 1.50-inch width but unknown cord length.

The finder treats “maximum” literally: a product passes only if its documented plate width is no greater than the selected number. Of 39 reviewed configurations, 37 have a usable published width; the black and white Duet hybrid editions omit numeric plate width and fail closed. Among the BaBylissPRO models, BNT130T, TrueTension BNTE100T, Prima3100 and BNTMB4095TUC are one inch; BNT4091TUC and both Prima3000 editions are 1¼ inches; BNT131T, BNT4073TUC and Iced Blue BNT131TLB are 1.5 inches; BNT134T and the distinct Ultra-Thin BNT4074TUC are two inches. The ghd Mini is 0.60 inch, white Unplugged 0.88 inch, fourteen ghd models one inch, three Sculpt plans 26 mm (26/25.4 = 1.0236 inches), black ghd Max 1.65 inches and five Chronos Max configurations two inches. The Prima3100 BNT3100TUC and the TrueTension BNTE100T fit a one-inch maximum; the BNT4091TUC at 1¼ inches first fits at 1.25 inches, while the BNT4073TUC at 1.5 inches remains above that threshold. The BNTMB4095TUC provides another sourced one-inch adjustable example; its power details remain unknown. The white Unplugged's 0.88-inch width still falls between 0.85 and 0.90 inches. The white Unplugged SKU 553 has a documented 0.88-inch plate: a 0.85-inch maximum excludes it, while 0.90 inches admits it. Widths are manufacturer specifications, not physical measurements or personal recommendations.

Check an 0.85-inch maximum → · Check a 0.90-inch maximum →

Cycle 27 numeric boundary: BNT4095TUC and BNT4072TUC each document an inclusive one-inch plate width, so both enter width-only results at a 1.0-inch maximum and remain eligible at wider caps; neither fits a stricter 0.95-inch ceiling. BNT4072TUC's five-inch extended plate is a separate length dimension, not a wider plate. Read the standard Digital and full-size Ultra-Thin assessments. Keep the inclusive one-inch maximum exact →

Cycle 28 inclusive thresholds: the 0.75-inch BNTPK1RB mini fits at 0.85 inches, while black Unplugged SKU 552 at 0.88 inch first fits at the valid 0.90-inch maximum; at 1.00 inch the package's separate one-inch Prima component is also within the cap. At 0.85 inches eight reviewed configurations match; at 0.90 inches ten do. At a 0.85-inch maximum, the BNTPK1RB set qualifies through its 0.75-inch BNTBRB2000UC mini; black ghd Unplugged SKU 552 at 0.88 inch is excluded. At a 0.90-inch maximum, both black ghd Unplugged SKU 552 at 0.88 inch and BNTPK1RB match; the package may match through either the 0.75-inch fixed mini or the one-inch adjustable iron. The package's two widths belong to different irons, not one combined plate. Compare black SKU 552, white SKU 553 and the BNTPK1RB set. Check 0.85 inch · check 0.90 inch · check the inclusive one-inch cap →

Cycle 28 width/cable boundary: with a 1.65-inch maximum and an 8.5-foot minimum, 44 configurations match; BNTPK1RB qualifies through its separate one-inch, nine-foot Prima iron. Cycle 28 width/cable boundary: with a 1.65-inch maximum and a 9.0-foot minimum, 25 configurations match; BNTPK1RB qualifies through its one-inch, nine-foot Prima iron. Cycle 28 width/cable boundary: with a one-inch maximum and a six-foot minimum, 33 configurations match; BNTPK1RB qualifies through the one-inch, nine-foot Prima iron. Cycle 28 width/cable boundary: with a one-inch maximum and a 6.5-foot minimum, 28 configurations match; BNTPK1RB qualifies through its one-inch, nine-foot Prima iron. These figures use the cable and width of the same straightener plan, not a package-wide composite. The six-foot ¾-inch mini instead fits the separate .75-inch/six-foot case. Compare the two model-specific BNTPK1RB plans. Check the exact combined answers: 1.65 inches / 8.5 feet · 1.65 inches / 9 feet · one inch / 6 feet · one inch / 6.5 feet.

Cycle 19 plan-level clarification: A package matches a maximum-width filter when at least one included straightener operating plan has a documented plate width at or below the cap. This does not imply that every included iron fits. The BNTPP93 set contains 1-inch adjustable BNT130T and ¾-inch fixed-heat BNT137 plans: the smaller iron makes the package eligible from a 0.75-inch cap, while the full-size tool remains wider. BNTPP79 and BNTPP84 each include documented one-inch compact irons. Read the exact package assessments if you need every included tool to meet the same limit.

These boundary snapshots are inclusive nominal specifications, not physical measurements. Each finder link below leaves all other choices open; unknown plate widths still fail closed.

  • At a 0.70-inch cap, three products match: the black ghd Mini and the two new half-inch BNTBG3050UC/BNT4171TUC configurations; BNTBRB2000UC and BNTPP93 at 0.75 inch remain above it. Find all matches at 0.70 inch →
  • At a 0.75-inch cap, eight products match, including BNTPK1RB through its 0.75-inch BNTBRB2000UC mini; its separate one-inch adjustable iron is too wide. Find all matches at 0.75 inch →
  • At a 0.95-inch cap, ten products match: the 0.60-inch Mini, both 0.88-inch Unplugged editions, the documented half- and three-quarter-inch tools, and the BNTPK1RB set through its narrow mini. Keep the 0.95-inch cap exact →
  • At a 1.0-inch cap, 42 products match; BNTPK1RB qualifies through its separate 0.75-inch mini or one-inch adjustable Prima iron, alongside other plans at or below the ceiling. Find every match at one inch →
  • At a 1.05-inch cap, 45 products match; the 0.88-inch Unplugged editions and both separate BNTPK1RB straighteners are within this cap, as are the 26 mm Sculpt plans at about 1.0236 inches. Find all matches at 1.05 inches →
  • At the configured 0.55-inch cap, the two new half-inch tools BNTBG3050UC and BNT4171TUC match; the 0.60-inch black ghd Mini is wider than this particular limit. Find the two half-inch matches at 0.55 inch →
  • At a 0.60-inch cap, three products match: the Mini and the half-inch BNTBG3050UC and BNT4171TUC; the 0.75-inch BNTBRB2000UC and BNTPP93 mini remain wider. Find all matches at 0.60 inch →
  • At a 0.85-inch cap, eight products match; BNTPK1RB passes through the 0.75-inch mini, while the two 0.88-inch Unplugged editions do not fit. Find all matches at 0.85 inch →
  • At a 0.90-inch cap, ten products match, including both 0.88-inch Unplugged editions and BNTPK1RB through either of its documented widths. Find all matches at 0.90 inch →
  • At a 1.25-inch cap, 53 products match, including both BNTPK1RB straightener plans through at least one documented plate no wider than 1.25 inches. Find all matches at 1.25 inches →
  • At a 1.45-inch cap, 53 products match, including the reviewed one-inch and 1¼-inch plans; the two-inch irons remain outside. Find all matches at 1.45 inches →
  • At a 1.50-inch cap, 63 products match; both BNTPK1RB irons fit through their separate 0.75-inch and one-inch plans, while two-inch irons remain above the cap. Find all matches at 1.50 inches →
  • At a 1.65-inch cap, 64 products match, including the separate BNTPK1RB iron plans; a package can qualify through an included tool at or below the selected width. Find all matches at 1.65 inches →
  • At a 1.70-inch cap, 64 products match and the 1¾-inch BNT4094TUC remains excluded; BNTPK1RB qualifies through either included straightener plan. Find all matches at 1.70 inches →
  • At a 1.75-inch cap, 65 products match, including BNTPK1RB through its two documented straightener plans. Find all matches at 1.75 inches →
  • At a 2.0-inch cap, 72 products with documented width match; the two Duet Style widths remain unknown and fail closed. Find all matches at two inches →

For the width recommendations in these examples, compare the 0.60-inch Mini, 0.88-inch white Unplugged, BNTPP79, BNTPP84, BNTPP93, BNT130T, BNT131T, blue Prima3000, Hot Pink Prima3000, Prima3100, one-inch BNTMB4095TUC, 1.5-inch Iced Blue BNT131TLB, 2-inch BNT4074TUC, 1¾-inch BNT4094TUC, one-inch Hot Pink BNT4172THP, and the cycle-21 ¾-inch BNT2000UC, one-inch BNT4172T, 1¼-inch BNT9091TXL and 1½-inch BNT4093TUC. A width match is not a handling or styling-performance promise.

Find tools that meet both the 0.75-inch maximum and fixed-heat preference → · Combine a 1.65-inch cap with an 8.5-foot cable minimum → · Keep both limits and raise the cable minimum to nine feet →

At a 1.65-inch cap and 8.5-foot minimum, 31 products match: BNTPP93 qualifies through its one-inch nine-foot BNT130T plan, and cycle-21 BNT4172T, BNT4093TUC and BNT9091TXL add nine- or ten-foot plans; the separate 0.75-inch BNT137 and BNT2000UC are six feet. Keep the 1.65-inch and 8.5-foot requirements together →

At a 1.65-inch cap and nine-foot minimum, 12 products match: BNTPP93 qualifies through BNT130T, and BNT4172T, BNT4093TUC and BNT9091TXL join through their distinct 9-, 9- and 10-foot leads. A bundle's other tool cannot supply a missing width or cable fact for the iron you intend to use. The six-foot BNT2000UC does not meet this threshold. Keep the width cap and nine-foot minimum together →

Cycle 20 width boundaries: BNTBG3050UC and BNT4171TUC each have maker-documented 0.50-inch plates and therefore fit the configured 0.50-inch minimum; at a 0.70-inch cap they still fit, while BNTBRB2000UC at 0.75 inch and BNTPP93 through its 0.75-inch mini do not. Raising that cap inclusively to 0.75 inches admits both the 0.75-inch BNTBRB2000UC and BNTPP93’s BNT137. At 1.25 inches, BNTPP98 enters through its flat-iron plates; the curling barrel’s equal diameter is not a straightener width. These are nominal manufacturer dimensions. Compare the BNTBG3050UC, BNT4171TUC, BNTBRB2000UC and BNTPP98 reviews for the exact width field and relevant plan. Check the configured 0.50-inch floor → · Keep the narrower 0.70-inch cap → · See the inclusive 0.75-inch set → · See the 1.25-inch set →

Cycle 22: at a 1.00-inch cap, 31 reviewed configurations match; BNTPP99 and BNTMB4072TUC add one-inch plans; the 1¼-inch BNTMB3000TUC remains above this limit. Keep the inclusive 1.00-inch maximum →

Cycle 22: at a 1.05-inch cap, 34 reviewed configurations match; BNTPP99 and BNTMB4072TUC add one-inch plans; the 1¼-inch BNTMB3000TUC remains above this limit. Keep the 1.05-inch maximum →

Cycle 22: at a 1.25-inch cap, 40 reviewed configurations match; all three cycle-22 plans fit, including BNTMB3000TUC at exactly 1¼ inches. Keep the 1.25-inch maximum →

Cycle 22: at a 1.45-inch cap, 40 reviewed configurations match; all three cycle-22 plans fit; BNTMB3000TUC’s 1¼-inch plate is the widest of them. Keep the 1.45-inch maximum →

Cycle 22: at a 1.50-inch cap, 44 reviewed configurations match; all three cycle-22 plans fit; BNTMB3000TUC’s 1¼-inch plate is the widest of them. Keep the 1.50-inch maximum →

Cycle 22: at a 1.65-inch cap, 45 reviewed configurations match; all three cycle-22 plans fit; BNTMB3000TUC’s 1¼-inch plate is the widest of them. Keep the 1.65-inch maximum →

Cycle 22: at a 1.70-inch cap, 45 reviewed configurations match; all three cycle-22 plans fit; BNTMB3000TUC’s 1¼-inch plate is the widest of them. Keep the 1.70-inch maximum →

Cycle 22: at a 1.75-inch cap, 46 reviewed configurations match; all three cycle-22 plans fit; BNTMB3000TUC’s 1¼-inch plate is the widest of them. Keep the 1.75-inch maximum →

Cycle 22: at a 2.00-inch cap, 53 reviewed configurations match; all three cycle-22 plans fit; BNTMB3000TUC’s 1¼-inch plate is the widest of them. Keep the 2.00-inch maximum →

Read the individually sourced BNTPP99 package assessment, BNTMB4072TUC review and BNTMB3000TUC review. Their nominal plate figures are one, one and 1¼ inches respectively; this boundary arithmetic is not a handling or styling-performance test.

Cycle 22: at a 1.65-inch cap and 8.5-foot cable minimum, 33 configurations match; BNTMB4072TUC and BNTMB3000TUC each document nine feet, while BNTPP99’s cable length is unknown. Keep the same 1.65-inch and 8.5-foot conditions →

Cycle 22: at a 1.65-inch cap and nine-foot cable minimum, 14 configurations match; BNTMB4072TUC and BNTMB3000TUC each document nine feet, while BNTPP99’s cable length is unknown. Their width and cable facts belong to the separate exact straightening plans, not a bundle-level average. Keep the same 1.65-inch and nine-foot conditions →

Cycle 23: at a 1.00-inch cap, 32 reviewed configurations match; the standalone compact BNTC4072T adds a one-inch adjustable plan, while the two new 1½-inch plates remain above the cap. The BNTC4072T is the compact iron, distinct from the full-size BNT4072TUC and from packages that include it. Keep the inclusive 1.00-inch maximum →

Cycle 23: at a 1.05-inch cap, 35 reviewed configurations match; the one-inch compact BNTC4072T enters, while BNT3300TUC and BNTMB4073TUC remain too wide. The compact BNTC4072T is the only new model under this ceiling; the exact Prima and Black & Blue Ultra-Thin pages specify 1½ inches. Keep the 1.05-inch maximum →

Cycle 23: at a 1.25-inch cap, 41 reviewed configurations match; compact BNTC4072T adds a one-inch plan, but both new 1½-inch models exceed the maximum. The compact review distinguishes it from those wider same-category tools. Keep the 1.25-inch maximum →

Cycle 23: at a 1.45-inch cap, 41 reviewed configurations match; compact BNTC4072T fits at one inch, while the two 1½-inch BNT3300TUC and BNTMB4073TUC plans remain above it. Compare the compact iron with the separate Prima and Black & Blue Ultra-Thin. Keep the 1.45-inch maximum →

Cycle 23: at a 1.50-inch cap, 47 reviewed configurations match; BNT3300TUC and BNTMB4073TUC enter at 1½ inches, alongside the one-inch BNTC4072T. The Prima's heated stainless outer housing and the Black & Blue model's five-inch extended plates distinguish their same-width profiles. See the separate BNT3300TUC, BNTC4072T and BNTMB4073TUC assessments. Keep the inclusive 1.50-inch maximum →

Cycle 23: at a 1.65-inch cap, 48 reviewed configurations match; all three new plans fit: the one-inch compact, the 1½-inch Prima and the 1½-inch Black & Blue Ultra-Thin. Their width evidence belongs to three exact models, not a shared family assumption. Keep the 1.65-inch maximum →

Cycle 23: at a 1.70-inch cap, 48 reviewed configurations match; the 1½-inch BNT3300TUC and BNTMB4073TUC, and one-inch BNTC4072T, all fit. Keep the 1.70-inch maximum →

Cycle 23: at a 1.75-inch cap, 49 reviewed configurations match; the new one-inch compact and two distinct 1½-inch models all fit. Keep the 1.75-inch maximum →

Cycle 23: at a 2.00-inch cap, 56 reviewed configurations match; all three new models fit, with the BNTC4072T at one inch and the BNT3300TUC and BNTMB4073TUC at 1½ inches. This still leaves the two Duet Style widths unknown rather than treating them as a match. Keep the 2.00-inch maximum →

Cycle 23: at a 1.65-inch cap and 8.5-foot minimum, 35 configurations match; BNT3300TUC and BNTMB4073TUC each supply a sourced nine-foot plan, while the compact BNTC4072T has only six feet. A width and cable must belong to one documented styling plan. Keep both limits together →

Cycle 23: at a 1.65-inch cap and nine-foot minimum, 16 configurations match; BNT3300TUC and BNTMB4073TUC meet the lead threshold, but the compact BNTC4072T does not. The exact 1½-inch Prima and Black & Blue Ultra-Thin pages each list nine feet; the compact model lists six. Keep both limits together →

Cycle 23: with a one-inch maximum and a six-foot minimum, compact BNTC4072T is included at both exact boundaries; BNT3300TUC and BNTMB4073TUC exceed the width cap. Its exact page lists a one-inch plate and six-foot lead. Keep the 1.0-inch and six-foot limits together →

Cycle 23 boundary check: raising the one-inch compact scenario from a six-foot to 6.5-foot minimum excludes BNTC4072T, whose exact cable is six feet. Keep the 1.0-inch cap and raise the cable minimum →

Cycle 24: at a 1.0-inch cap, 34 of 62 reviewed configurations match; BNT4070T and BNT411T enter at exactly one inch, while the BNTPP100/BNT4173T iron plans are 1½ inches. Both one-inch profiles have adjustable heat; BNT411T lists a nine-foot cord but no voltage claim, and BNT4070T lists universal voltage but no numeric cord length. See the separate BNT4070T, BNT411T, BNT4173T and BNTPP100 assessments. Keep the inclusive 1.00-inch maximum →

Cycle 24: at a 1.45-inch cap, 43 configurations match; BNT4070T and BNT411T fit, but both exact 1½-inch BNT4173T iron plans remain above the limit. BNTPP100 includes the same exact BNT4173T code as the standalone review but is a separate dryer-and-iron package; neither iron can be counted under this narrower ceiling. BNTPP100 · standalone BNT4173T · Keep the 1.45-inch maximum exact →

Cycle 24: at a 1.50-inch maximum, 51 configurations match; the one-inch BNT4070T and BNT411T and both separate 1½-inch iron plans enter at their documented widths. The package’s iron plan belongs to BNTPP100; the separate BNT4173T shares its component model but is a different catalogue product. Keep the inclusive 1.50-inch maximum →

Cycle 24: at a 1.65-inch maximum, 52 of 62 configurations match; all four additions fit by plate width, but BNT4070T still cannot meet a numeric cord-length requirement because its lead is undocumented. Width fit alone is separate from voltage, heat mode and reach. Keep the 1.65-inch maximum →

Cycle 24 interaction: with a 1.65-inch width cap and an 8.5-foot cable minimum, 38 configurations match; BNTPP100, BNT411T and standalone BNT4173T enter with nine-foot straightener leads, while BNT4070T has unknown length. For this combined case, each qualifying cable belongs to the same iron plan that provides the cited width; BNTPP100’s separate dryer cable is irrelevant. BNTPP100 · BNT411T · BNT4173T · Keep the same 1.65-inch cap and 8.5-foot minimum →

Cycle 24 interaction: at a 1.65-inch cap and a nine-foot minimum, 19 configurations match, including the same three exact nine-foot plans; the one-inch BNT4070T remains out because its lead is unknown. The source-backed cable belongs to the BNT411T and BNT4173T irons and to BNTPP100’s included BNT4173T, not to its separate dryer. Keep both limits together →

Cycle 24 boundary: with a one-inch maximum and a six-foot minimum, 27 configurations match; BNT411T enters through its exact nine-foot cord, while BNT4070T cannot pass the numeric cable condition. The width and cable evidence both belong to the same one-inch BNT411T plan. Read its exact-model review · Keep the one-inch cap and six-foot minimum together →

Cycle 24 boundary: raising that one-inch cable minimum to 6.5 feet yields 23 configurations; BNT411T still qualifies with nine feet, while the exact BNT4070T lead remains unknown and fails closed. The change is not a recommendation to stretch a cord or use it as a safety radius. Keep the 1.0-inch cap and 6.5-foot minimum together →

Cycle 25 widths: at a 1.0-inch cap, 36 of 66 configurations match; the curved BNT4061UC and BNTPP76 enter through their documented one-inch straightening plates, while BNT9125TUC at 1.25 inches and Hot Pink BNT131THP at 1.5 inches remain above the cap. Review the standalone curved iron, its separate gift-set configuration, BNT9125TUC and BNT131THP. Keep the inclusive one-inch maximum →

Cycle 25 widths: at a 1.65-inch maximum, 56 of 66 configurations match; BNT9125TUC at 1.25 inches, Hot Pink BNT131THP at 1.5 inches and both one-inch curved BNT4061UC plans fit. BNTPP76 is counted through its BNT4061UC straightener, not by assigning a flat-iron width to the separate curling iron. Compare BNT9125TUC, BNT131THP, BNT4061UC and BNTPP76. Keep the 1.65-inch maximum →

Cycle 25 widths: at a 2.0-inch maximum, 64 of 66 configurations match; all four new straightening configurations fit by their documented widths, including BNTPP76 only through its one-inch curved iron. A package match identifies one included straightening plan, not every tool in the box. Read BNT9125TUC, BNT131THP, BNT4061UC and BNTPP76. Keep the two-inch maximum →

Cycle 25 widths: at a 1.05-inch cap, 39 of 66 configurations match; the one-inch curved BNT4061UC and BNTPP76 join, while BNT9125TUC at 1.25 inches and Hot Pink BNT131THP at 1.5 inches remain outside. The two new positive results are specifically straightening plates, including the curved tool’s explicitly documented straightening use. BNT4061UC · BNTPP76 · BNT9125TUC · BNT131THP · Keep a 1.05-inch cap →

Cycle 25 widths: at a 1.45-inch cap, 46 of 66 configurations match; BNT9125TUC and the two one-inch curved straightening plans enter, but Hot Pink BNT131THP at 1.5 inches does not. BNT9125TUC sits below the cap; BNT4061UC and BNTPP76 use one-inch straightening plates. Keep the 1.45-inch cap exact →

Cycle 25 widths: at a 1.5-inch maximum, 55 of 66 configurations match; all four additions fit at their exact 1.0-, 1.25- or 1.5-inch straightening widths. The package is included only through BNT4061UC, and the separately boxed curling iron is not another plate-width plan. Compare BNT9125TUC, BNT131THP, BNT4061UC and BNTPP76. Keep the inclusive 1.5-inch maximum →

Cycle 25 widths: at a 1.25-inch cap, 46 of 66 configurations match; BNT9125TUC enters at 1.25 inches and the curved pair at one inch, while Hot Pink BNT131THP remains too wide. BNT9125TUC meets the boundary inclusively; the curved BNT4061UC and BNTPP76 are narrower. Keep the inclusive 1.25-inch cap →

Cycle 25 widths: at a 1.7-inch cap, 56 of 66 configurations match; all four new profiles fit, including the 1.5-inch Hot Pink iron and the separate package’s one-inch curved straightener. The Hot Pink model and BNTPP76 package have different tool configurations; the latter uses only BNT4061UC as its straightening plan. BNT9125TUC · BNT4061UC · Keep the 1.7-inch cap →

Cycle 25 widths: at a 1.75-inch cap, 57 of 66 configurations match; each of the four new products fits through its documented straightening plan, while BNTPP76’s curling iron remains outside this width interpretation. See the exact BNT9125TUC, BNT131THP, BNT4061UC and BNTPP76 assessments. Keep the 1.75-inch maximum →

Cycle 25 width and heat interaction: at a 1.65-inch cap with adjustable heat, 33 of 66 configurations match; all four new plans are adjustable and at or below the width cap, including the two curved-iron entries through their straightening plate. BNT9125TUC and BNT131THP document selectable settings; curved BNT4061UC and BNTPP76 use five adjustable settings up to 450°F. BNT9125TUC · BNT131THP · Keep both the width cap and adjustable-heat requirement →

Cycle 25 width-and-cord interaction: with a 1.65-inch cap and 8.5-foot minimum, 41 of 66 configurations match; BNT131THP and both BNT4061UC curved-straightener configurations enter with sourced nine-foot leads, while BNT9125TUC has unknown cord length. The family-manual caveat for BNT131THP and component-specific evidence for BNT4061UC / BNTPP76 remain distinct. Keep both limits together →

Cycle 25 width-and-cord interaction: with a 1.65-inch cap and nine-foot minimum, 22 of 66 configurations match; Hot Pink BNT131THP and the standalone/package curved BNT4061UC straightener plans meet both inclusive limits, while BNT9125TUC’s cable length is unstated. The BNTPP76 plan takes its nine-foot value from the named BNT4061UC component, not its separate curling iron. Keep the 1.65-inch and nine-foot limits →

Cycle 25 width-and-cord interaction: with a one-inch maximum and six-foot minimum, 29 of 66 configurations match; BNT4061UC and BNTPP76 fit at one inch with nine-foot leads, while BNT9125TUC lacks a documented cord length and BNT131THP is wider than the cap. BNT4061UC is a curved styling plate explicitly documented for straightening; BNTPP76 contains that exact iron. Keep both answers at one inch/six feet →

Cycle 25 width-and-cord interaction: with a one-inch maximum and 6.5-foot minimum, 25 of 66 configurations match; BNT4061UC and BNTPP76 qualify at their one-inch plate and nine-foot cord boundaries; BNT131THP is too wide and BNT9125TUC has no numeric cable evidence. This half-foot step does not disqualify the nine-foot curved iron. Keep the one-inch cap and raise reach to 6.5 feet →

Cycle 25 width witnesses include the newly sourced 1.0-inch curved BNT4061UC and its distinct BNTPP76 package plan, 1.25-inch BNT9125TUC and 1.5-inch Hot Pink BNT131THP. The numeric input is an inclusive maximum on a documented straightening plan; unknown widths fail closed and bundles match only through an actual included straightener. Check the exact one-inch width boundary → · Check 1.25 inches → · Check 1.5 inches →

Cycle 25: at a 1.0-inch cap, 36 of 66 configurations match; the curved BNT4061UC and BNTPP76 enter through their documented one-inch straightening plates, while BNT9125TUC at 1.25 inches and Hot Pink BNT131THP at 1.5 inches remain above the cap. Keep the one-inch maximum →

Cycle 25: at a 1.65-inch maximum, 56 of 66 configurations match; BNT9125TUC at 1.25 inches, Hot Pink BNT131THP at 1.5 inches and both one-inch curved BNT4061UC plans fit. Keep the 1.65-inch maximum →

Cycle 25: at a 2.0-inch maximum, 64 of 66 configurations match; all four new straightening configurations fit by their documented widths, including BNTPP76 only through its one-inch curved iron. Keep the 2.0-inch maximum →

Cycle 25: at a 1.05-inch cap, 39 of 66 configurations match; the one-inch curved BNT4061UC and BNTPP76 join, while BNT9125TUC at 1.25 inches and Hot Pink BNT131THP at 1.5 inches remain outside. Keep the 1.05-inch maximum →

Cycle 25: at a 1.45-inch cap, 46 of 66 configurations match; BNT9125TUC and the two one-inch curved straightening plans enter, but Hot Pink BNT131THP at 1.5 inches does not. Keep the 1.45-inch maximum →

Cycle 25: at a 1.5-inch maximum, 55 of 66 configurations match; all four additions fit at their exact 1.0-, 1.25- or 1.5-inch straightening widths. Keep the 1.5-inch maximum →

Cycle 25: at a 1.25-inch cap, 46 of 66 configurations match; BNT9125TUC enters at 1.25 inches and the curved pair at one inch, while Hot Pink BNT131THP remains too wide. Keep the 1.25-inch maximum →

Cycle 25: at a 1.7-inch cap, 56 of 66 configurations match; all four new profiles fit, including the 1.5-inch Hot Pink iron and the separate package’s one-inch curved straightener. Keep the 1.7-inch maximum →

Cycle 25: at a 1.75-inch cap, 57 of 66 configurations match; each of the four new products fits through its documented straightening plan, while BNTPP76’s curling iron remains outside this width interpretation. Keep the 1.75-inch maximum →

Cycle 25: with a 1.65-inch cap and 8.5-foot minimum, 41 of 66 configurations match; BNT131THP and both BNT4061UC curved-straightener configurations enter with sourced nine-foot leads, while BNT9125TUC has unknown cord length. Keep the width cap and cable minimum together →

Cycle 25: with a 1.65-inch cap and nine-foot minimum, 22 of 66 configurations match; Hot Pink BNT131THP and the standalone/package curved BNT4061UC straightener plans meet both inclusive limits, while BNT9125TUC's cable length is unstated. Keep both conditions at nine feet →

Cycle 25: with a one-inch maximum and six-foot minimum, 29 of 66 configurations match; BNT4061UC and BNTPP76 fit at one inch with nine-foot leads, while BNT9125TUC lacks a documented cord length and BNT131THP is wider than the cap. Keep both conditions at one inch/six feet →

Cycle 25: with a one-inch maximum and 6.5-foot minimum, 25 of 66 configurations match; BNT4061UC and BNTPP76 qualify at their one-inch plate and nine-foot cord boundaries; BNT131THP is too wide and BNT9125TUC has no numeric cable evidence. Keep both conditions and raise reach to 6.5 feet →

Cycle 26 width boundaries, counted across 70 reviewed configurations: newly resolved standalone models document four separate inclusive thresholds—¾-inch BNT137, one-inch BP9557UC, 1¼-inch BNT4090T and 1½-inch BP9559UC. These are exact model widths, not approximations borrowed between similarly sized irons.

Cycle 27 width-and-cord check: 43 configurations meet a 1.65-inch cap and 8.5-foot minimum; BNT4095TUC and BNT4072TUC both meet the width and nine-foot cable conditions. Keep both conditions exact →

Cycle 27 width-and-cord check: 24 configurations meet a 1.65-inch cap and 9.0-foot minimum; each new one-inch model meets both inclusive limits. Keep both conditions exact →

Cycle 27 width-and-cord check: 32 configurations meet a one-inch cap and six-foot minimum; the two new models meet both boundaries with one-inch plates and nine-foot cords. Keep both one-inch and six-foot limits →

Cycle 27 width-and-cord check: 27 configurations meet a one-inch cap and 6.5-foot minimum; both new models pass with nine-foot cords. Keep both limits and the 6.5-foot minimum →

Cycle 28 width-and-cord check: the BNTPK1RB set joins at a 1.65-inch cap with 8.5- or 9-foot reach and at a one-inch cap with six- or 6.5-foot reach. Its ¾-inch mini lists a six-foot cord, and its separate one-inch Prima iron lists nine feet, so each result depends on one compatible plan; the set does not fit a 0.75-inch cap with a nine-foot minimum. Read the two-plan review and keep both conditions together in the 1.65/8.5, 1.65/9, 1.0/6, 1.0/6.5 and 0.75/9 cases.

Cycle 29 width evidence: BNTPP94, BNTPP95 and BNTPP80 each add a separate 1.0-inch straightening plan; BNTPP81 adds a 1.25-inch BNT4090T plan. The one-inch sets fit an inclusive 1.0 cap, and all four fit an inclusive 1.25 cap. These measurements refer to the straightener component only—not the 1¼-inch curling barrel or the separate dryer. Compare each BNTPP94, BNTPP95, BNTPP80 and BNTPP81 assessment. Keep a one-inch maximum · or include up to 1.25 inches.

Cycle 29 width-and-cord boundary at a 1.65-inch cap and 8.5-foot minimum: 45 reviewed configurations match; only BNTPP94 among the four new sets joins because the exact BNT411T page lists a nine-foot cord. The BNT4070T and BNT4090T lead lengths remain unknown; a companion curling iron or dryer cable is not substituted. Review BNTPP94 · Keep both conditions together →

Cycle 29 width-and-cord boundary at a 1.65-inch cap and nine-foot minimum: 26 reviewed configurations match; BNTPP94's exact BNT411T lead reaches the inclusive nine-foot line. Other new sets have no numeric straightener-cord value and therefore fail closed rather than borrowing a companion tool's cord length. Keep the same width cap and nine-foot minimum →

Cycle 29 width-and-cord boundary at a one-inch cap and six-foot minimum: 34 reviewed configurations match; BNTPP94 meets the cable condition through its nine-foot BNT411T iron. BNTPP95/80 also fit the width but cannot pass a numeric reach filter on unknown BNT4070T cable data. Keep both limits together →

Cycle 29 width-and-cord boundary at a one-inch cap and 6.5-foot minimum: 29 reviewed configurations match, including BNTPP94 through the exact BNT411T nine-foot cord. The package's dryer and the other sets' curling tools do not establish a flat-iron cord length. Keep the same one-inch cap and 6.5-foot minimum →

Cycle 30: exact-width updates for the three individually reviewed additions. The standalone BNT3050UC has a documented 0.5-inch plate and therefore fits every currently supported maximum from the questionnaire's 0.5-inch lower endpoint upward. The straightener included in BNTPP54MB is 1.25 inches; BNT4174T is exactly two inches. These are plan-level plate widths, not product-body dimensions or evidence about styling speed.

Cycle 30 width-and-cord interaction: At a 1.65-inch cap with an 8.5-foot or nine-foot minimum, BNTPP54MB qualifies through its 1.25-inch BNTMB3000TUC iron and its own nine-foot lead. BNT4174T is too wide for that cap, and BNT3050UC cannot satisfy an essential cable minimum because its cord length is unknown. See the BNTPP54MB package assessment and BNT4174T's width evidence · 1.65 inches / 8.5 feet · 1.65 inches / nine feet

At a 1.65-inch cap and an 8.5-foot minimum, BNTPP54MB matches through its 1.25-inch BNTMB3000TUC iron and its documented nine-foot lead. At a 1.65-inch cap and a nine-foot minimum, that same exact straightener plan still qualifies; the two-inch BNT4174T is too wide and BNT3050UC's lead length is unknown. Read the BNTPP54MB assessment · same 1.65-inch / 8.5-foot answers · same 1.65-inch / nine-foot answers

Cycle 32 width/reach result at a 1.65-inch cap and 8.5-foot minimum: S37A10 at 0.5 inch and S9350US at one inch meet the width cap, but neither has a documented straightener-cord length; the two-inch S5755NA-VN is too wide and also has no published lead figure. A maker's omission is not zero length, but it cannot satisfy an essential numeric minimum. Review the S37A10, S9350US and S5755NA-VN records · keep the same width cap and 8.5-foot minimum →

Cycle 32 width/cable boundary at a 1.0-inch cap and 6.0-foot minimum: 34 configurations match, but none of the three Remington models joins because each straightener lead is undocumented. Both S37A10 and S9350US fit the width ceiling; their missing length evidence fails closed even at this lower cable threshold, and S5755NA-VN exceeds the width limit as well. S37A10 · S9350US · S5755NA-VN · preserve both requirements →

Cycle 32 width boundaries: the newly reviewed Remington S37A10 is 0.5 inch, S9350US is 1.0 inch, and S5755NA-VN is 2.0 inches. At the 0.5-inch inclusive lower endpoint, S37A10 enters; at a 0.95-inch cap only S37A10 of these three fits; at 1.0 inch S9350US enters; both remain inside 1.65 inches, while the two-inch S5755NA-VN does not enter until the inclusive 2.0-inch cap. These are published plate dimensions, not measurements of the full tool or promises about access. See the separate S37A10, S9350US and S5755NA-VN assessments. 0.5-inch lower endpoint · 0.95-inch cap · 1.0-inch cap · 1.65-inch cap · 2.0-inch cap

At the exact 0.5-inch lower endpoint, four width-known configurations match; among the three new Remington irons, only S37A10 fits. Its plate is at the inclusive limit; S9350US at one inch and S5755NA-VN at two inches exceed it. Read S37A10 · compare S9350US · compare S5755NA-VN · preserve the exact half-inch cap →

Cycle 33 width boundary: S9511-VN and S5750NA-VN each document a 1.0-inch plate; S25A10A documents a 1.75-inch plate, so the first pair fit at 1.0 while S25A10A does not enter until 1.75 inches. The exact page fixes S25A10A's one-and-three-quarter-inch size even though its linked manual's PDF filename says “2 Inch”; the same family guide still supports the model's venting and voltage instructions. Read the separate S9511-VN, S25A10A and S5750NA-VN reviews. 1.0-inch inclusive maximum · 1.70-inch maximum · 1.75-inch inclusive maximum

Cycle 33 numeric boundary at a 1.0-inch maximum: S9511-VN and S5750NA-VN are within the inclusive limit, while S25A10A at 1¾ inches is above it. The one-inch models are positive width examples; the wider iron remains excluded under this exact cap. S9511-VN · S5750NA-VN · S25A10A · Find all matches at one inch →

Cycle 33 numeric boundary at the inclusive 1.75-inch maximum: all three new Remington widths fit; S25A10A first enters at its own documented 1¾-inch width. At 1.70 inches the one-inch pair already fit but S25A10A remains above the cap. Check 1.70 inches · Check the exact 1.75-inch boundary →

Cycle 34 at a 1.0-inch maximum: the S9500PP-VN one-inch plate is included at the inclusive boundary; two-inch S9531-VN and S9355US exceed it. The exact Pearl Pro page names one inch, while each wider iron is documented at two inches. See the separate S9500PP-VN, S9531-VN and S9355US reviews · Keep the inclusive one-inch cap →

Cycle 34 at a 1.95-inch maximum: the one-inch S9500PP-VN remains within the cap, while S9531-VN and S9355US at two inches remain too wide. This valid five-hundredths increment is the negative side of the two-inch threshold; the two-inch plans enter only at 2.0 inches. S9500PP-VN · S9531-VN · S9355US · Check the same 1.95-inch cap →

Cycle 34 at the inclusive 2.0-inch maximum, all three new Remington plans fit by documented plate width: S9500PP-VN is one inch; S9531-VN and S9355US are two inches. These exact nominal widths do not prove comparative styling speed, comfort or results. Read the model-specific Pearl Pro, Shine Therapy and Gloss assessments · Keep the inclusive two-inch maximum →

Cycle 37's width evidence adds two inclusive boundaries. The documented S16A11A and S5777NA plates are each nominally 1 inch: they fail a 0.95-inch cap and enter at 1.0 inches. The S33A10B-VN plate is nominally 1¼ inches, so it remains outside at 1.20 inches and enters at 1.25; its barrel diameter is a separate curling mode, not a plate-width substitute. At 1.65 inches all three width-documented plans fit. The S9333US plate width was not published in the checked sources, so it remains excluded at every numeric width threshold rather than receiving an inferred dimension. These are maker-stated dimensions, not our measurements or comparative performance claims. Read the S16A11A, S5777NA, S33A10B-VN and S9333US reviews. Check the same 0.95-inch cap → · Keep the inclusive 1.0-inch cap → · Keep the 1.20-inch cap below the next boundary → · Check the inclusive 1.25-inch boundary → · Keep the 1.65-inch maximum →

Cycle 41 numeric upper boundary: the questionnaire accepts a maximum up to 2.5 inches, but that inclusive ceiling only compares documented plate widths. A generous cap does not turn every straightening method into a plate iron. The Remington D20A10B uses its documented SlipStream airflow attachment and publishes no plate-width figure; it therefore remains outside any numeric plate-width match, including at 2.5 inches. See the D20A10B assessment · Check the inclusive 2.5-inch ceiling →

Cycle 63 inclusive one-inch width boundary: CS224, CS810NN, CS999, CS2573 and CS710L each have a directly supported 1.00-inch plate. Each therefore enters at the inclusive 1.00-inch maximum and is excluded by 0.95 inches. This is a listed nominal width, not a measurement of comfort or styling performance. Compare the CS224, CS810NN, CS999, CS2573 and CS710L reviews · Use the inclusive 1.00-inch ceiling → · Compare with a 0.95-inch cap →

Cycle 63 width/reach interaction: with a 1.00-inch plate ceiling and a six-foot minimum, CS810NN qualifies through its manufacturer-listed six-foot line cord. The other four new Conair irons have unknown cable lengths and fail closed; raising the threshold to 6.5 feet excludes CS810NN as well. Keep one inch and six feet together → · Raise only the cable minimum →

Width, heat, power, voltage and cable length together

Cycle 55 five-way boundary: at a 1.00-inch cap with selectable heat, corded power, dual-voltage wording and a 9-foot minimum, GF1051 White and GF8562 Black meet all five; fixed-preset CA2013 and CA1087F, wider CA7558 and CA1133, and CA1133's unknown voltage keep them out. Both Titanium XL pages list 11-foot cords, and their matching facts belong to separate exact SKUs. Review GF1051, GF8562, CA2013, CA1087F, CA7558 and CA1133. 1-inch / adjustable / corded / universal / 9-foot minimum →

Cycle 55 five-way wider case: with a 1.50-inch maximum, selectable heat, corded use, dual-voltage wording and a 6.5-foot minimum, CA7558 and the two Titanium XL versions fit among these six; the fixed CA1087F/CA2013 and the 2-inch, voltage-unknown CA1133 do not. The width cap admits CA7558's 1.25-inch plate but remains narrower than CA1133's 2-inch hybrid. 1.5-inch / adjustable / corded / universal / 6.5-foot minimum →

A 0.55-inch ceiling includes the documented half-inch irons

At a 0.55-inch cap, BNTBG3050UC and BNT4171TUC match through their manufacturer-listed 0.50-inch plates; the black ghd Mini at 0.60 inch and the 0.75-inch BNTBRB2000UC remain outside. Width is the numeric plate span in the source, not the outside body width.

Check the current library against a 0.55-inch maximum →

A 0.60-inch ceiling admits both half-inch irons and the Mini

A 0.60-inch maximum admits the black ghd Mini plus the half-inch BNTBG3050UC and BNT4171TUC; the white Unplugged at 0.88 inch and BNTBRB2000UC at 0.75 inch are wider, and the two Duet Style plate widths remain unknown. The Mini’s maker-listed plate is exactly 0.60 inch and ghd says hair must be at least half an inch long for styling with its slim plate. Read the black Mini assessment; width does not guarantee short-hair comfort or a styling result.

Find documented models at or below 0.60 inch →

A 0.95-inch ceiling includes the Mini and Unplugged

A 0.95-inch maximum admits the 0.60-inch black ghd Mini SKU 662 and the white Unplugged SKU 553 at 0.88 inch; known one-inch and wider plates exceed it, and the two Duet Style widths are unknown. Read the black Mini assessment and white Unplugged assessment for their distinct corded and battery-powered routines. The Unplugged page gives up to 20 minutes per charge, but that maker-stated runtime does not show how long a particular routine will take. This is a geometry filter, not a promise that a narrower tool is easier or better for a particular person.

Check the current library against a 0.95-inch maximum →

A 1.05-inch ceiling includes the 26 mm Sculpt editions

A 1.05-inch maximum includes 23 models: fourteen one-inch ghd configurations, the 0.60-inch Mini, the 0.88-inch white Unplugged, BNT130T, TrueTension BNTE100T, Prima3100 and the one-inch digital BNTMB4095TUC, plus all three 26 mm Sculpt configurations at about 1.0236 inches. The one-inch BNTMB4095TUC page documents adjustable digital heat but does not establish power mode or voltage. The 1¼-inch BNT4091TUC and Prima3000 models, 1.5-inch BNT131T/BNT4073TUC/BNT131TLB, and 2-inch BNT134T/BNT4074TUC remain above this ceiling. The metric Sculpt width is converted, not rounded down to one inch. Find all documented widths up to 1.05 inches →

Find every currently reviewed model at or below 1.05 inches →

A one-inch cap includes the Mini and Unplugged

An exact 1-inch maximum admits 20 reviewed configurations: the 0.60-inch Mini, the 0.88-inch Unplugged, fourteen one-inch ghd models, BNT130T, TrueTension BNTE100T, Prima3100 and the Black & Blue digital BNTMB4095TUC. Its exact page identifies a one-inch plate and user-adjustable heat, but power mode is unknown. The BNT4091TUC and both Prima3000 editions at 1¼ inches, the 1.5-inch BNT131T/BNT4073TUC/BNT131TLB family and 2-inch BNT134T/BNT4074TUC exceed this ceiling. See the BNTMB4095TUC and BNT130T reviews for different exact-code control evidence. Find all currently reviewed models at or below one inch →

Find all currently reviewed models at or below one inch →

A 1.25-inch cap admits both Prima3000 editions

A 1.25-inch maximum admits 26 width-documented models, including the one-inch Black & Blue BNTMB4095TUC, BNT4091TUC and separate blue BNT3000TUC-N and Hot Pink BNT3000THP Prima3000 editions at 1¼ inches; BNT131T, Iced Blue BNT131TLB and BNT4073TUC at 1.5 inches remain outside. The BNTMB4095TUC fits width and adjustable heat but its power mode stays unknown. The matching-code BNT4091TUC manual supports its 1¼-inch width; the two Prima3000 editions are separate configurations. Compare BNT4091TUC, the blue Prima3000 and Hot Pink Prima3000. The 1.5-inch Iced Blue BNT131TLB is just beyond this ceiling. Find every reviewed width at or below 1.25 inches →

Find current models at or below 1.25 inches →

A 1.45-inch ceiling keeps the 1.5-inch BNT131T out

At a 1.45-inch maximum, 26 reviewed models fit, including the one-inch BNTMB4095TUC and the existing documented group through 1¼ inches; BNT131T and Iced Blue BNT131TLB at 1.5 inches, Ultra-Thin BNT4073TUC at 1.5 inches and the two-inch BNT134T/BNT4074TUC remain above the cap. The Black & Blue digital has a sourced one-inch plate but unknown power mode. The similar-width Iced Blue BNT131TLB is not admitted until the inclusive 1.5-inch threshold. Find all current candidates at or below 1.45 inches →

Find models at or below 1.45 inches →

A 1.5-inch ceiling admits the middle Ultra-Sleek width

A 1.5-inch maximum admits 29 reviewed configurations: the documented-width group through 1¼ inches, including BNTMB4095TUC, plus BNT131T, Ultra-Thin BNT4073TUC and Iced Blue BNT131TLB at 1.5 inches; BNT134T and Ultra-Thin BNT4074TUC at two inches remain outside. The exact Iced Blue suffix is a 1.5-inch Ultra-Sleek model with five settings and a nine-foot cord; its voltage is not inferred from BNT131T. The same-width BNT4073TUC is a distinct Ultra-Thin model. The one-inch BNTMB4095TUC passes the cap but its power arrangement is unknown. Find all reviewed models at or below 1.5 inches →

Find models at or below 1.5 inches →

A 1.65-inch cap admits the Mini, Unplugged, Sculpt, and exact black Max

A 1.65-inch maximum admits 30 reviewed models: the Mini, white Unplugged, fourteen one-inch ghd configurations, BNTMB4095TUC and other one-inch BaBylissPRO tools, 1¼-inch candidates, BNT131T/BNT4073TUC/Iced Blue BNT131TLB at 1.5 inches, three 26 mm Sculpt configurations and black ghd Max at its specific 1.65-inch FAQ dimension; BNT134T, BNT4074TUC and all five two-inch Chronos Max configurations remain above it. The BNT131TLB is inside the width cap with a nine-foot lead, but its voltage is unknown; the one-inch BNTMB4095TUC is width-compatible though power mode is unverified. The two-inch BNT4074TUC is excluded despite matching adjustable heat. The two Duet plate widths remain unknown. Find every reviewed model at or below 1.65 inches →

Find every current reviewed model at or below 1.65 inches →

Cycle 18 count update for that same width-only condition: 31 of the 41 reviewed configurations have a documented plate at or below 1.65 inches. The one-inch Hot Pink BNT4172THP is added inside the cap; the 1¾-inch BNT4094TUC is not. The Duet Style widths remain unknown and fail closed. Keep the 1.65-inch maximum and see the current set →

Compare the 0.60-inch Mini, 0.88-inch Unplugged, black Max review, the narrower Original, one-inch Platinum+ set and 26 mm black Sculpt.

A two-inch cap includes all 34 configurations with known widths

A 2-inch maximum admits all 37 reviewed configurations with a documented width, including BNTMB4095TUC at one inch, Iced Blue BNT131TLB at 1.5 inches and the 2-inch Ultra-Thin BNT4074TUC; only the two Duet Style plate widths remain unknown and fail closed. The BNT4074TUC is a distinct Ultra-Thin configuration with a 50-setting linked manual, not the similarly wide Ultra-Sleek BNT134T. The Iced Blue suffix and one-inch Black & Blue digital are also separate reviewed model identities. This filter sets a maximum, not a preference for the widest plate. Find all currently reviewed models at or below two inches →

Find all currently reviewed models at or below two inches →

Cycle 18 update: at a two-inch inclusive maximum, 39 width-documented configurations now match; the two Duet Style models remain unknown. This adds the separately evidenced 1¾-inch BNT4094TUC and one-inch BNT4172THP, not a blanket claim about every BaBylissPRO tool. Check the unchanged two-inch maximum →

Read the Mini, white Unplugged, BNT130T, BNT131T, BNT134T, blue Prima3000, Hot Pink Prima3000, Prima3100, separate ghd Max, black Chronos Max, Chronos Max gift set SKU 796, black Chronos Max bundle SKU 742 and pink Chronos Max SKU 770 assessments before treating similar names as a shared configuration.

Check the smallest fixed-heat plan in a bundle

At a 0.75-inch cap plus acceptance of a single preset, BNTPP93 matches through its fixed BNT137 mini; the one-inch adjustable BNT130T is a separate plan. The ghd Mini is the other matching reviewed product. The BNTPP79 and BNTPP84 one-inch compact irons exceed the cap and use adjustable heat, so neither meets both requirements. This package-level result does not claim that both irons in BNTPP93 share the mini's width or heat behavior. Compare the Mini with the exact BNTPP93 set assessment. Keep both the width cap and fixed-heat preference selected →

Cycle 20 update: four reviewed configurations meet both a 0.75-inch maximum and acceptance of fixed heat: the black Mini, BNTBG3050UC, BNTBRB2000UC and BNTPP93 through the separate BNT137 mini. BNTBG and BNTBRB each have a different fixed profile; only BNTBG has a verified corded dual-voltage plan. The BNT4171TUC half-inch plate fails the fixed-heat choice because its page documents five selectable settings. Read the BNTBG3050UC and BNTBRB2000UC assessments alongside BNTPP93’s mini-specific review. Keep width and fixed heat selected together →

Cycle 21 update: five configurations meet the 0.75-inch maximum and fixed-heat-acceptable conditions; BNT2000UC is the new plan with a documented single 420°F target. Its width/control record is separate from BNTBRB2000UC's unknown power arrangement. Read BNT2000UC alongside the other mini cases and keep the same two finder choices →

Cycle 22: a 0.75-inch cap with fixed heat acceptable still matches five configurations; none of the three new products fits this width and heat combination. BNTPP99 and BNTMB4072TUC are one inch wide; BNTMB3000TUC is 1¼ inches, and all three document adjustable heat. Keep the same width and fixed-heat conditions →

Cycle 26: a 0.75-inch maximum plus acceptance of fixed heat matches six configurations; standalone BNT137 adds its exact ¾-inch single-mode plan. The model-specific BNT137 review documents operation up to 430°F and a six-foot lead; its fixed control is why it qualifies here while the newly resolved adjustable models do not. Retain both conditions in the finder →

Cycle 28: seven configurations now match a 0.75-inch cap with fixed heat acceptable; BNTPK1RB adds its ¾-inch mini. Its one-inch Prima iron is adjustable and too wide for this case. Review the set's separate component plans and keep both width and control preferences selected →

Cycle 30: eight configurations now meet the 0.75-inch maximum with fixed heat acceptable; standalone BNT3050UC joins through its exact half-inch on/off mini plan. Its stated up-to-430°F ceiling is not a user-selected setting. Compare the BNT3050UC review · keep both width and heat conditions together →

Cycle 68 fixed-heat/width check: Compact 77500 documents fixed 410°F heat, but its 0.8-inch and 1-inch official-page labels conflict. It therefore does not enter the otherwise meaningful one-inch-plus-fixed set: no numerical width is assigned. Its fixed control belongs to the fixed-heat answer only. Keep the one-inch cap and fixed-heat-acceptable choice together →

Cycle 51 one-inch fixed-heat intersection: the CHI Original GF1001 combines one-inch floating ceramic plates with one fixed 392°F preset, so it qualifies when the cap is exactly one inch and fixed heat is accepted. Adjustable GF8813 and GF1185 do not meet fixed heat. Keep the one-inch maximum and fixed-heat answer together →

Cycle 49 width/heat addition: with fixed heat and a 1.0-inch maximum, CHI LAVA GF8269 also qualifies through its one-inch plate and single listed 395°F preset. Its adjustable siblings GF8215 and GF8281 do not meet the fixed-heat request. Read the GF8269 review · Keep the one-inch maximum and fixed-heat answer together →

A narrow ceiling and fixed heat are separate filters

Cycle 35 at a 1.0-inch cap with fixed heat acceptable: 25 configurations match, including S1303 through its fixed 375°F target; adjustable S5505P-VN and S5503NA do not meet the fixed-heat condition. Read the exact S1303, S5505P-VN and S5503NA assessments · Keep the one-inch maximum and fixed-heat answer together →

With fixed heat acceptable and a one-inch width maximum, 16 currently reviewed models match: the Mini, the 0.88-inch white Unplugged and fourteen one-inch configurations; the three Sculpt configurations, black ghd Max and all five Chronos Max configurations fail the width ceiling. The Unplugged's fixed 365°F preset qualifies but its charging-voltage statement does not create corded styling. The black Chronos SKU 691 bundle and Cherry Chic SKU 720 set are examples of the distinct one-inch packages inside the same result; the dryer in SKU 720 does not change the iron's heat or width. The chosen plate span and tolerance for a preset are separate shopper constraints, so keeping both in the finder narrows the real candidate set without implying a winner.

Find the joint one-inch / fixed-target set →

Compare the 0.60-inch Mini, white Unplugged, black Original, Cashmere Beige Chronos set, black Chronos SKU 691 bundle, Cherry Chic set SKU 720 and black Platinum+ set with the dusted-pink Chronos; these exact packages differ in contents and voltage evidence.

Cycle 19: With fixed heat acceptable and a one-inch width maximum, 17 configurations match, including BNTPP93 through its 0.75-inch BNT137 mini; BNTPP79 and BNTPP84 use adjustable one-inch compact irons and do not qualify. The new set adds a real multi-plan boundary rather than a fixed-heat claim for every included tool. Review BNTPP93's two separate irons before choosing the bundle. Return to the exact one-inch plus fixed-heat finder →

Cycle 20 update: 19 configurations meet a 1.0-inch maximum with fixed heat acceptable; BNTBG3050UC and BNTBRB2000UC join through their documented half-inch and three-quarter-inch fixed plans. The half-inch BNT4171TUC is narrower but adjustable, and BNTPP98 is adjustable at 1¼ inches, so neither matches both conditions. Compare the BNTBG3050UC and BNTBRB2000UC with the separate plan examples discussed above. Keep the one-inch ceiling and fixed-heat answer together →

Cycle 21 update: 20 reviewed configurations meet the same one-inch cap with fixed heat acceptable; BNT2000UC joins via its documented ¾-inch single-420°F plan, distinct from the similarly named BNTBRB2000UC. The new one-inch BNT4172T is adjustable and does not enter this fixed-heat result. Compare the exact BNT2000UC assessment and keep both conditions in the finder: one-inch maximum plus fixed heat →

Cycle 22: a one-inch cap with fixed heat acceptable still matches 20 configurations; none of the three new products enters because all document adjustable heat. The package TrueTension iron is adjustable as a separate plan, and the two Black & Blue irons also specify selectable settings. Keep the same one-inch/fixed-heat case →

Cycle 26: a one-inch maximum with fixed heat acceptable matches 21 configurations; standalone BNT137 joins through its 0.75-inch single-mode plan, while BP9557UC's one-inch rheostat is adjustable. The documented setting distinction comes from the exact BNT137 mini and BP9557UC reviews. Keep width and fixed-heat preference selected together →

Cycle 28: this one-inch/fixed-heat case now has 23 matches. Black Unplugged SKU 552 adds a fixed 365°F cordless plan, and BNTPK1RB matches only through its separate ¾-inch fixed mini, not its one-inch adjustable Prima iron. Read SKU 552 and the two-component set assessment. Keep the one-inch cap and fixed-heat choice together →

Cycle 30: at a 1.0-inch cap with fixed heat acceptable, 24 configurations match; standalone BNT3050UC is a new 0.5-inch fixed/on-off plan. Its half-inch straightening span is separate from the dimensions of the BNTBG3050UC pouch offer. Read the standalone review · keep the exact one-inch and fixed-heat answers →

Cycle 51 wider-cap fixed contrast: GF1001 still fits a 1.65-inch cap and fixed-heat request at its listed one-inch width and 392°F single preset; selectable-heat GF8813 and GF1185 remain excluded. Review GF1001 · Keep the 1.65-inch cap and fixed-heat choice together →

Cycle 49 width/heat addition: with fixed heat and a 1.65-inch maximum, CHI LAVA GF8269 also qualifies through its one-inch plate and single listed 395°F preset. The separately reviewed GF8215 and GF8281 have adjustable controls and do not meet this fixed-heat condition. Read the GF8269 review · Keep the 1.65-inch maximum and fixed-heat choice together →

Cycle 48 width/heat interaction: the three 1.5-inch Ministylers fit a 1.65-inch cap, but their 340–410°F range listings do not establish a fixed target; none qualifies for the fixed-heat combination. The exact White GF0097, Red CA8578 and Gunmetal CA8595A pages leave control type unresolved · Keep the 1.65-inch cap and fixed-heat requirement together →

A slightly wider cap admits SKU 535 and Unplugged

At a 1.65-inch width maximum, both Ruby Anniversary plates fit numerically, but neither model satisfies fixed or adjustable heat because the exact-page evidence does not resolve its controls. The GF9021 page's 392°F preset does not establish a fixed-only mechanism; GF9024A's “Digital” name and 410°F page maximum do not resolve controls, especially with 425°F visible in its exact hero image. Read the GF9021 and GF9024A reviews · 1.65-inch cap and fixed heat · 1.65-inch cap and adjustable heat →

Cycle 35 at a 1.65-inch maximum with fixed heat acceptable: 26 configurations match, including the one-inch fixed-target S1303; adjustable S5505P-VN and S5503NA remain outside this heat choice. Its linked family guide identifies one 375°F target, while the two anti-static models document user adjustment. Compare their S1303, S5505P-VN and S5503NA evidence · Keep both the width cap and fixed-heat condition selected →

At 1.65 inches with fixed heat accepted, 17 models match: the Mini, white Unplugged, fourteen one-inch models and black ghd Max; all three 26 mm Sculpt configurations fit the width limit but remain unclassified for heat, and all five 2-inch Chronos Max configurations stay outside the maximum. The shared “Max” word does not make the products' width specification or heating system identical; the Unplugged's fixed target and cordless power arrangement are separately documented. The Chronos SKU 691 brush bundle and SKU 720 dryer set remain one-inch fixed-target tools despite their different package extras.

Find the joint 1.65-inch / fixed-target set →

Compare the matching Mini, white Unplugged, black ghd Max, black Chronos SKU 691 bundle, Cherry Chic set SKU 720 and one-inch Platinum+ gift set; the two-inch Chronos Max gift set is a useful excluded contrast at this width ceiling.

Cycle 19: At a 1.65-inch cap with fixed heat accepted, 18 configurations match, including BNTPP93 through its fixed BNT137 mini; BNTPP79 and BNTPP84 remain outside this heat choice. Its wider BNT130T is adjustable and is not combined with BNT137's fixed setting. See BNTPP93's separate plans and keep both filters intact →

Cycle 20 update: 20 configurations meet a 1.65-inch cap with fixed heat acceptable, including BNTBG3050UC and BNTBRB2000UC through their separate fixed-heat mini plans. BNTPP98 and BNT4171TUC do not meet fixed heat because both document selectable settings. Read the two fixed-heat BNTBG3050UC and BNTBRB2000UC assessments to keep power and heat evidence separate. See the complete fixed-heat set at the same 1.65-inch maximum →

Cycle 21 update: 21 reviewed configurations meet a 1.65-inch maximum with fixed heat acceptable; BNT2000UC is the new match among this cycle's products. The three adjustable BNT4172T/BNT9091TXL/BNT4093TUC profiles do not pass fixed heat. The ¾-inch BNT2000UC's single 420°F target and six-foot cord are model-specific, not traits of every Prima2000. Read the exact BNT2000UC assessment and retain both width and fixed-heat conditions →

Cycle 22: a 1.65-inch cap with fixed heat acceptable still matches 21 configurations; none of the three new products enters because all document adjustable heat. Their otherwise qualifying one- and 1¼-inch plate sizes do not replace this heat-control requirement. Keep the same 1.65-inch/fixed-heat case →

Cycle 26: a 1.65-inch maximum with fixed heat acceptable matches 22 configurations; BNT137 adds a fixed ¾-inch plan, but all three other new models have adjustable heat. Review the distinct standalone mini, BP9557UC, BNT4090T and BP9559UC; fit inside the width cap does not substitute for fixed heat. Keep both conditions selected →

Cycle 28: at a 1.65-inch maximum with fixed heat acceptable, 24 configurations match. Black Unplugged SKU 552 adds its fixed 0.88-inch plan, and BNTPK1RB qualifies through its ¾-inch fixed mini, not its adjustable one-inch Prima iron. Read the black Unplugged and BNTPK1RB assessments. Keep both conditions exact →

Cycle 30: at a 1.65-inch cap with fixed heat acceptable, 25 configurations match; standalone BNT3050UC adds a documented half-inch fixed/on-off plan. BNT4174T and BNTPP54MB are adjustable, so neither fits this particular heat requirement despite their supported voltage. Read the BNT3050UC assessment · keep both original conditions together →

Cycle 68 wider adjustable intersection: at an inclusive 1.65-inch maximum, the one-inch Smooth X, Smooth ID, Lucea 1-inch and StylePlus plus the 1.5-inch Lucea 77530 and SinglePass X 73541 meet the width/control pair. Tightening the cap to one inch drops both 1.5-inch irons; the unknown-width Curling Straightener and conflicting-width Compact remain outside every numeric-width answer. Keep the 1.65-inch ceiling and adjustable-heat requirement together →

Cycle 62 at a 1.65-inch maximum with selectable heat, all three Conair irons qualify on width and control: CS1000 is one inch, CS1001 is 1.25 inches and CS1002 is 1.50 inches. Tightening the same adjustable-heat case to 1.00 or 1.25 inches removes the wider models one boundary at a time. Their exact power plans are corded, but none has a published cable length. Read CS1000, CS1001 and CS1002 · same 1.65-inch/adjustable conditions · 1.00-inch boundary · 1.25-inch boundary →

Cycle 54 width-and-control interaction: at a 1.65-inch maximum with adjustable heat, both CA1174 (adjustable dial) and GF0101 (selectable presets) qualify on their own documented plans. CA2222's 0.75-inch plates fit the width limit but do not establish adjustable temperature control, so a listed heat span and three heated-surface modes do not bring it into this intersection. Keep the 1.65-inch maximum and adjustable-heat answer together →

Cycle 53 width/control threshold: at a 1.65-inch maximum all four newly reviewed CHI models have documented adjustable heat and fall within the cap; at a one-inch maximum, the three one-inch variants remain while 1.25-inch GF7057A drops out. The G2 pages call their controls selectable digital presets, while the Tourmaline pages describe adjustable dials; preset count and dial increments remain unstated. Read the GF1595A, GF7057A, CA1010 and CA2205 reviews · one-inch maximum plus adjustable heat · 1.65-inch maximum plus adjustable heat →

Cycle 52 width/control interaction: the one-inch GFDB12 is within a 1.65-inch maximum and has documented adjustable 180–450°F heat. Its exact page does not provide temperature increments or a personal heat recommendation. See the GFDB12 assessment · Keep the same 1.65-inch cap and adjustable-heat answer →

Cycle 50 width/heat combination: with adjustable heat required and a 1.65-inch maximum, all three new CHI plans fit: GF1042 at 1.25 inches and GF8300/GF1187 at 1.50 inches. GF1042 offers five selectable presets; the other two list 200–450°F displays. Compare the GF1042, GF8300 and GF1187 reviews · Keep the 1.65-inch maximum and adjustable-heat choice together →

Cycle 49 width/heat addition: at a 1.65-inch maximum, adjustable GF8215 and GF8281 both fit by their one-inch plates. GF8281 is adjustable, although its listed upper temperature conflicts with the linked image. The maximum conflict does not change its documented adjustable control classification, but the upper value remains unknown. Compare GF8215 and GF8281 · Keep the 1.65-inch maximum and adjustable-heat condition together →

Cycle 48 width/heat interaction: the three 1.5-inch Ministylers fit a 1.65-inch cap, but their temperature bounds do not document user-adjustable controls; none is counted in the adjustable-heat combination. Compare the White GF0097, Red CA8578 and Gunmetal CA8595A assessments · Keep the 1.65-inch cap and adjustable-heat requirement together →

Cycle 47 width/heat interaction: with adjustable heat, GF8822 joins GF0099 at a one-inch maximum; at a 1.65-inch cap GF0096 also fits by its wider documented plate. GF8822 has five listed presets, but its exact page's 410°F maximum conflicts with two listed values. Read the GF8822 review · one-inch cap plus adjustable heat · 1.65-inch cap plus adjustable heat →

Cycle 46 width/heat interaction: at a 1.65-inch maximum with adjustable heat, both GF0099 and GF0096 match; at a 1.0-inch cap only the one-inch GF0099 remains. The exact GF0096 page lists a 1.5-inch plate, so it is rejected at the narrower ceiling even though its control range is also adjustable. This is a dimensional boundary, not a style-speed claim. Compare GF0099 and GF0096 · 1.65-inch maximum plus adjustable heat →

A wider width limit cannot create adjustable heat

At a 1.65-inch width maximum, both Ruby Anniversary plates fit numerically, but neither model satisfies fixed or adjustable heat because the exact-page evidence does not resolve its controls. The exact GF9021 listing of 392°F is not proof of a fixed-only control, and GF9024A's Digital label does not prove the operation of its controls. See GF9021 and GF9024A · Keep the 1.65-inch cap and adjustable-heat requirement together →

Cycle 37 at a 1.65-inch maximum with adjustable heat: 54 configurations match, including the 1.0-inch S5777NA and S16A11A and 1.25-inch S33A10B-VN; width-unknown S9333US remains excluded. All three width-documented irons are individually adjustable; the fourth model's width is not inferred from the Twist & Curl name or a styling image. Compare the S5777NA, S16A11A, S33A10B-VN and S9333US reviews. Keep the same 1.65-inch cap and adjustable-heat requirement →

Cycle 35 at a 1.65-inch maximum with adjustable heat: 51 configurations match, including S5505P-VN and S5503NA; fixed-target S1303 is excluded. The S5505 page's conflicting one-inch and 1¾-inch statements remain a package-verification caveat even though the assessed width stays one inch. Compare the S5505P-VN, S5503NA and S1303 reviews · Keep both requirements unchanged in the finder →

At a 1.65-inch maximum and essential adjustable heat, ten models match: BNT130T, TrueTension BNTE100T, BNT131T, Ultra-Thin BNT4073TUC, Ionic BNT4091TUC, one-inch digital BNTMB4095TUC, Iced Blue BNT131TLB and all three Prima variants; the two-inch BNT134T and BNT4074TUC remain above the width ceiling. The new BNTMB4095TUC qualifies on exact one-inch width and adjustable digital heat, though its power mode is unknown. The BNT131TLB is an additional 1.5-inch selectable-heat configuration, but its exact voltage is unverified. The BNT4074TUC also has user-adjustable heat and dual voltage but is two inches wide, so it fails this maximum. A matching name or plate span does not make the operating evidence interchangeable. Find every currently reviewed model meeting both width and adjustable-heat requirements →

Find every currently reviewed model meeting both width and adjustable-heat requirements →

Cycle 18 witness for these two interacting requirements: eleven models match a 1.65-inch maximum plus user-adjustable heat. The BNT4172THP is inside the threshold; the BNT4094TUC has adjustable heat but is too wide. The full matched set stays available at the same two-condition finder link above.

Cycle 24: at a 1.65-inch maximum with adjustable heat, 29 configurations match; BNT4070T and BNT411T add one-inch plans, while BNTPP100 and standalone BNT4173T add separate 1½-inch plans. The package contains the same BNT4173T iron model as the standalone product, not a different iron specification; its dryer remains a separate appliance. BNT4070T lists 50 settings to 450°F, BNT411T five settings without a complete setpoint chart, and BNT4173T five exact temperatures. Compare the BNT4070T, BNT411T, standalone BNT4173T and BNTPP100 reviews. Keep width and adjustable heat selected together →

Cycle 19: At a 1.65-inch maximum with adjustable heat essential, 14 configurations match, including BNTPP79 and BNTPP84 through their compact irons and BNTPP93 through its BNT130T plan. The ¾-inch BNT137 in BNTPP93 has fixed heat, so it is not the plan meeting the adjustable requirement. Package members remain distinct rather than being merged. BNTPP79, BNTPP84 and BNTPP93 have separate plan evidence. Find the whole 1.65-inch adjustable-heat set →

Cycle 20 update: 16 configurations meet a 1.65-inch maximum plus essential adjustable heat; the half-inch BNT4171TUC and BNTPP98 through its 1¼-inch flat iron are new plan-specific matches. BNTBG3050UC and BNTBRB2000UC document fixed heat and therefore do not pass the adjustable requirement. Compare the BNT4171TUC with the BNTPP98 plan-specific review. Keep both the 1.65-inch limit and adjustable-heat requirement →

Cycle 21 update: 19 reviewed configurations meet a 1.65-inch cap with user-adjustable heat essential; BNT4172T at one inch, BNT9091TXL at 1¼ inches and BNT4093TUC at 1½ inches all join. Their distinct settings and source limits are in the exact assessments: BNT4172T, BNT9091TXL and BNT4093TUC. The BNT4093TUC page/manual disagree on damp versus dry use; this width/heat result does not endorse damp-hair operation. Keep width and adjustable heat together →

Cycle 22: at a 1.65-inch maximum with adjustable heat, 22 configurations match; the one-inch BNTPP99 TrueTension plan and one-inch BNTMB4072TUC join, as does the 1¼-inch BNTMB3000TUC. The BNTPP99 is a two-tool package, but only its TrueTension straightener supplies this width-and-adjustable match. Compare the exact BNTPP99, BNTMB4072TUC and BNTMB3000TUC plans. Keep width and adjustable heat selected together →

Cycle 23: at a 1.65-inch maximum with adjustable heat, 25 configurations match; BNTC4072T adds a one-inch plan and BNT3300TUC and BNTMB4073TUC add distinct 1½-inch plans. The compact model lists three temperatures, the Prima lists five LED settings to 465°F and the Black & Blue Ultra-Thin lists 50 settings to 450°F; these are exact-page claims, not measured heat. Compare the compact, Prima and Black & Blue Ultra-Thin reviews. Keep width and adjustable heat selected together →

Cycle 24: at a 1.65-inch maximum with adjustable heat, 29 configurations match; all four new iron plans fit and offer selectable controls, including the BNT4173T iron both standalone and inside BNTPP100. BNT4070T and BNT411T are one inch; BNT4173T and the prepack are 1½ inches. Five settings on BNT411T do not have a published complete setpoint chart, while BNT4173T’s exact values are 300/340/380/420/450°F and BNT4070T lists 50 settings to 450°F. These remain manufacturer specifications rather than measured temperature evidence. BNT4070T · BNT411T · BNT4173T · BNTPP100 · Keep width and adjustable heat selected together →

Cycle 25: at a 1.65-inch maximum with adjustable heat, 33 of 66 configurations match; all four new plans are adjustable and at or below the width cap, including the two curved-iron entries through their straightening plate. BNT9125TUC lists five temperatures; BNT131THP has a linked base-family manual; and curved BNT4061UC / BNTPP76 qualify only through their 1-inch straightening plate. Keep both the width cap and adjustable-heat requirement →

Cycle 25: at a 1.65-inch maximum with adjustable heat, 33 of 66 configurations match; all four new plans are adjustable and at or below the width cap, including the two curved-iron entries through their straightening plate. Keep the width and adjustable-heat conditions together →

Cycle 26: at a 1.65-inch maximum with adjustable heat, 36 configurations match; one-inch BP9557UC, 1¼-inch BNT4090T and 1½-inch BP9559UC add new width/control profiles. BP9557UC and BP9559UC are the 120 V-only rheostat models; the BNT4090T has five exact settings and 120–240 V input, but no published cable length. Compare BP9557UC, BNT4090T and BP9559UC. Keep the exact width and adjustable-heat conditions →

Cycle 27 interaction: at a 1.65-inch width cap with adjustable heat, both exact one-inch tools also fit. The standard BNT4095TUC Digital has plus/minus control and memory, while BNT4072TUC Ultra-Thin lists 50 settings and five-inch plates; their maker controls do not establish measured heat accuracy. Keep the 1.65-inch maximum and adjustable-heat requirement together →

Cycle 28: 39 configurations meet the same 1.65-inch cap with adjustable heat; BNTPK1RB qualifies through its one-inch five-setting Prima iron. The package's ¾-inch mini is fixed at one target and cannot supply the adjustable match. Black and white Unplugged tools are also fixed-temperature cordless plans, not adjustable alternatives. Compare the two separate package irons and black Unplugged. Keep width and adjustable-heat conditions together →

Cycle 29 width/heat interaction: at a 1.65-inch cap with adjustable heat, 43 reviewed configurations match. BNTPP94, BNTPP95 and BNTPP80 add their exact one-inch straightener plans; BNTPP81 adds a separate 1.25-inch plan. The sole straightener plan in each set carries its own supported width and control evidence. BNTPP94 · BNTPP95 · BNTPP80 · BNTPP81 · Keep both requirements together in the finder →

Cycle 30: at a 1.65-inch cap with adjustable heat essential, 44 configurations match, including BNTPP54MB through its 1.25-inch BNTMB3000TUC iron. The two-inch BNT4174T exceeds this width ceiling; BNT3050UC is fixed heat rather than adjustable. The component-specific BNTPP54MB review keeps its straightener separate from the curling iron · keep the cap and heat requirement together →

Cycle 32 boundary at a 0.5-inch width maximum plus adjustable heat: two reviewed configurations match, including the half-inch Remington S37A10. The one-inch S9350US and two-inch S5755NA-VN offer adjustable heat but exceed the half-inch ceiling. S37A10 · S9350US · S5755NA-VN · keep both conditions exact →

Cycle 32 at a 1.0-inch cap with adjustable heat: 26 configurations match, including S37A10 and the one-inch Gloss S9350US; the two-inch Botanicals S5755NA-VN is too wide. The S9350US product page lists nine settings but its linked booklet uses the S9350US-VN suffix. Read each S37A10, S9350US and S5755NA-VN assessment · keep the one-inch maximum and adjustable heat together →

Cycle 32: with a 1.65-inch maximum and adjustable heat, 46 of 84 configurations match; S37A10 and S9350US fit, while the two-inch S5755NA-VN remains above the width limit. The wider iron does not pass merely because its heat is adjustable. S37A10 · S9350US · S5755NA-VN · keep both exact requirements →

Cycle 32 at a 2.0-inch cap plus adjustable heat: 51 configurations match, including all three Remington plans. The S5755NA-VN enters at its documented inclusive two-inch width; the half-inch S37A10 and one-inch S9350US are also within the maximum. find the complete two-inch / adjustable-heat set →

Cycle 33 at a 1.65-inch cap with adjustable heat: 48 configurations match; the one-inch S9511-VN and S5750NA-VN join, while 1¾-inch S25A10A remains over this cap. Both new one-inch Remington plans meet the exact width and heat conditions; the wider Wet2Style does not. Read S9511-VN and S5750NA-VN alongside the S25A10A width assessment · Keep the same 1.65-inch and adjustable-heat answers →

Cycle 33 at a 1.0-inch maximum with adjustable heat: 28 configurations match, including the two one-inch Remington plans; the 1¾-inch S25A10A does not fit. The one-inch boundary also retains the smaller S37A10 and the one-inch S9350US. Compare S37A10, S9350US, S9511-VN and S5750NA-VN; the wider S25A10A remains outside. Keep both the one-inch cap and adjustable heat →

Cycle 33 at a 2.0-inch maximum plus adjustable heat: 54 configurations match, including all three Remington models at their separately documented widths. The half-inch S37A10, one-inch S9350US, two-inch S5755NA-VN, one-inch S9511-VN, 1¾-inch S25A10A and one-inch S5750NA-VN each meet this inclusive maximum with their own adjustable plan. Read the separate S37A10, S9350US, S5755NA-VN, S9511-VN, S25A10A and S5750NA-VN assessments · Keep both exact conditions selected →

A 0.85-inch ceiling excludes the 0.88-inch Unplugged

At a 0.85-inch maximum, the black 0.60-inch Mini matches but the white Unplugged at 0.88 inch does not. The Mini is corded while styling; the Unplugged is cordless, so their different power modes remain separate from this width-only case. Width is a documented plate span, not a guarantee about access or comfort.

Cycle 28 adds a separate positive package plan at this threshold: the BNTPK1RB set matches through its 0.75-inch mini, while black ghd Unplugged SKU 552 at 0.88 inch remains outside the 0.85-inch cap. Read the black model assessment; its universal input is for charging only. Keep the exact 0.85-inch ceiling in the finder →

Read the matching Mini assessment · Find models at or below 0.85 inch →

A 0.90-inch ceiling admits the Unplugged's documented width

A 0.90-inch maximum admits both 0.88-inch Unplugged editions—black SKU 552 and white SKU 553—along with the 0.60-inch Mini and BNTPK1RB through its 0.75-inch mini plan. The two Unplugged tools are cordless and cannot be used while charging; the package's width match is through its separate fixed mini, not the one-inch Prima component. Compare the black SKU 552, white SKU 553 and BNTPK1RB set; width remains a published specification, not a personal comfort promise.

Find all reviewed models at or below 0.90 inch →

How the two new widths change the inclusive thresholds

This cycle adds two individually sourced dimensions to the 41-model reviewed library: one-inch BNT4172THP and 1¾-inch BNT4094TUC. The exact manual maps BNT4094TUC to 44 mm and its product page calls it 1¾ inches; the Hot Pink BNT4172THP exact page calls its plate one inch. These are published nominal specifications, not sample measurements.

A 1.70-inch maximum excludes the 1¾-inch BNT4094TUC, while the next valid 1.75-inch threshold includes it; both thresholds include the one-inch BNT4172THP. Read the separate BNT4094TUC and BNT4172THP reviews before treating widths as interchangeable. Check the 1.70-inch maximum exactly → · Check the inclusive 1.75-inch maximum exactly →

The Hot Pink model also fits the 1.0-, 1.05-, 1.25-, 1.45-, 1.5- and 1.65-inch examples because its exact page specifies one inch; the 1¾-inch Ionic model first enters at 1.75 inches. Both fit the two-inch maximum. A numeric cap does not specify preferred width or guarantee that a plate is manageable for a given section. See the one-inch-width set → · See the 1.65-inch-width set → · See the two-inch-width set →

Ready to turn these preferences into a shortlist?

Build my shortlist →